一、配置
I. Configuration
強力馬達:攪拌粘性物料,****攪拌量為15L(水)強磁性:磁性強,以防跳子微處理控制:馬達轉速信號反饋,以保證恒速運轉陶瓷盤面:一體成型無縫盤面,抗化學腐蝕性能極好控制面板抬高:使溶液濺到面板的幾率最小化,便于讀取數字和控制轉速。
Powerful motor: for stirring of viscous material; maximum stirring capacity is 15L (water); strong magnetism: for prevention of pulse Micro-processing control: motor speed signal feedback to ensure the constant-speed operation; ceramic disk: one-piece seamless disk surface with strong resistance to chemical corrosion; lifting of control panel: minimize the probability of solution splashing onto panel, for the convenience of reading of digits and speed control
選配件: IKAFLON 10 磁力攪拌子, IKAFLON 15 磁力攪拌子, IKAFLON 20 磁力攪拌子, IKAFLON25 磁力攪拌子, IKAFLON 30 磁力攪拌子, IKAFLON 40 磁力攪拌子, IKAFLON 50 磁力攪拌子,IKAFLON 80 磁力攪拌子, TRIKA 25 三角體磁力攪拌子, TRIKA 42 三角體磁力攪拌子, RS 1 磁力攪拌子套裝, RSE 攪拌子移出棒, H 16 V 支桿。
Options: magnetic stirring bar model IKAFLON 10; magnetic stirring bar model IKAFLON 15; magnetic stirring bar model IKAFLON 20; magnetic stirring bar model IKAFLON 25; magnetic stirring bar model IKAFLON 30; magnetic stirring bar model IKAFLON 40; magnetic stirring bar model IKAFLON 50; magnetic stirring bar model IKAFLON 80; triangular magnetic stirring bar model TRIKA 25; triangular magnetic stirring bar model TRIKA 42; RS1 magnetic stirring bar kits; RSE stirring bar removing rod; H16V stru.
二、技術參數
Ⅱ. Technical Parameters
每個攪拌點位****攪拌量 (H2O) Stir each mixing point maximum amount (H2O) |
L | 15 |
****攪拌量 (H2O) Maximum stirring capacity (H2O) |
L | 15 |
電機輸入功率Motor input power | w | 15 |
電機輸出功率Motor output power | w | 1.5 |
轉速顯示 Speed display | 刻度 | |
速度范圍 Speed range | 1/min | 100-1500 |
攪拌子****長度 Maximum length of stirring | mm | 80 |
轉速控制 Speed control | 刻度 0-6 | |
工作盤材質 Plate material | 陶瓷 | |
工作盤外形尺寸 Working plate dimensions | mm | 280×280 |
外形尺寸 Dimensions | mm | 300×105×415 |
重量 Weight | kg | 6 |
允許環境溫度 Permissible ambient temperatu | °C | 5 - 40 |
允許相對濕度 Relative humidity allowed | % | 80 |
DIN EN 60529 保護方式 DIN EN 60529 Protection Mode | IP 21 | |
電壓 Voltage | V | 230 |
頻率 Frequency | Hz | 50/60 |
儀器輸入功率 Power input | W | 30 |